Mitsubishi Electric 700 Series Training Manual page 191

4. Edit Screens
Menus (the cursor is at the WorkColor, MachinedColor, TappedColor,
InterferenceColor, SectionColor in the window)
Menu
This sets the material color (WorkColor), machining surface color
Default
(MachinedColor), tap surface color (TappedColor), interference
color
surface color (InterferenceColor), and cross section color
(SectionColor).
Gray
The drawings are made using the following colors when the default
colors are selected.
Red
Material color
Machining surface color
Tap machining surface color : Light blue
Yellow
Interference surface color
Cross section color
Blue
Green
Light
blue
Purple
Pink
This closes the pop-up window and quits this function.
Close
Setting the material shape (WorkForm)
(1) Use the ↑ , ↓ keys to move the
cursor to the material shape settings
column.
(2) Press the menu Block .
It is also possible to set input values.
0 INPUT : Default shape
1 INPUT : Block
Details
: Gray
: Yellow
: Red
: Green
" Block " appears at the cursor position.
The cursor moves one place down.
A block guide drawing appears in the guide drawing area.
183
4.4 Program Check (3D)
Type Reference
C "Setting the material
color"
C