Mitsubishi Electric 700 Series Training Manual page 238

6. Maintenance Screens
Menus
Menu
This changes the screen related to the maintenance by setting the
Psswd
password.
input
This forcible stops the PLC ladder process. If this menu key is pressed
PLC
stop in the stopped state, the stop is canceled.
This backs up (saves) or restores (reloads) the file such as SRAM etc.
All
to designated device.
backup
This automatically executes necessary parameter setting for driving
System
servomotor only by setting necessary minimum item.
setup
This changes the screen to that for adjusting the spindle analog
Adjust
S-ana output.
This sets the absolute position for servo axis (arbitrary NC axis, PLC
To
axis).
Abs pos
This carries out absolute position setting or test operation by the
AUX
auxiliary axis forward run/reverse run.
test
This executes the followings.
Setting to collect the diagnosis data
Collect
Confirming the diagnosis data collection status
set
Starting/Stopping to collect the diagnosis data
Clearing the diagnosis data
This sets the options.
Option
setting
This formats the NC memory.
Format
This formats the tool life management data.
T-life
format
This changes the NC serial No.
Serial
No.Set
The console is executed. The MS-DOS window will appear.
Console
exec
This changes the screen to the Data Input/Output screen.
To
In/out
This changes the screen to the Parameter screen.
To
param
This backs up the NC SRAM information on the HD.
SRAM
backup
This quits the screen operation.
HMI
Quit
Backing up the NC SRAM information
(1) Press the menu
(2) Press
Y or
Press a key other than Y or
INPUT to cancel the backup.
Details
SRAM backup .
INPUT .
A message appears to confirm the backup execution.
The backup is executed.
The data is backed up into "D:\ NCFILE \ SRAM.BIN" on the
HD.
(If SRAM.BIN already exists, the original file will be saved as
SRAM.BAK.)
230
Type Reference
A
C
C
C
C
C
C
C
C
B
B
A
C
C
C
B
B