Executing The Mstb Commands - Mitsubishi Electric 700 Series Training Manual

2. Monitor Screens

2.3.5 Executing the MSTB Commands

If the MSTB history menu is pressed after restart search is completed, the MSTB commands used for
machining program appear.
When the cursor is moved to the listed M, S, T, B commands and the
command will be executed.
Up to 35 M commands, 3 commands each for S1 to S4, 3 T commands and 3 B commands are displayed. If
many MSTB commands are used for machining, the MSTB commands used at first will not appear.
Operation method
(1) Press the submenu MSTB history .
(2) Using the ↑ , ↓ , → and ← keys, move the
cursor to the position of the data to set.
(3) Press the INPUT key.
(4) Repeat steps (2) and (3).
(5) When completed with all settings, press
the Close or MSTB history menu.
The pop-up window changes to the MSTB history window.
The MSTB commands used for machining program are
listed.
The designated command is executed. A value, which has
been commanded once, is displayed in gray. The cursor will
move to the next item.
The MSTB history pop-up window closes and the restart
search main window appears as a pop-up window.
35
2.3 Restart Search
INPUT key is pressed, that