System Reactions On Alarms - Siemens SINUMERIK 840D sl Series Diagnostics Manual

System Reactions on Alarms

Names COMPBLOCKWITHREORG
Effect Block preparation has detected an error, which can be rectified by modifying the pro-
gram. Reorganization is performed after a program modification.
− Correction block with reorganization.
Names COMPENSATIONBLOCK
Effect Block preparation has detected an error, which can be rectified by modifying the pro-
gram.
− Correction block
Names FOLLOWUP
Effect Follow-up of axes
− NC switches to follow-up mode
Names INTERPRETER STOP
Effect Program execution is aborted after all the prepared blocks (interpolator buffer) have
been processed.
− Interpreter stop
Names LOCALREACTION
− Local alarm response
Effect
Names NOALARMREACTION
− No alarm reaction
Effect
Names NOREADY | NCKREACTIONVIEW
Effect NCK ready off: Active rapid deceleration (i.e. with maximum braking current) of all drives
Clearing of servo enable for all NC axes Release of NC ready relay
− NC not ready
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
5
5-987