Siemens SINUMERIK 840D sl Series Diagnostics Manual page 573

08/2005
Definitions: --
Remedy: --
104253
Only tool life or quantity monitoring possible
Definitions: --
Remedy: --
104254
Illegal magazine or location number
Definitions: --
Remedy: --
104255
Function Current location not valid for buffer
Definitions: --
Remedy: --
105000
Error %1 ! %2
Parameters: %1 = --
%2 = --
Definitions: System-internal error.
A memory-access has failed - should not occur in normal operation.
Remedy: --
105001
Cycles description '%1' not available
Parameters: %1 = --
Definitions: The cycle description sc.com was not found in the NCK file system.
Remedy: --
105002
File %1 exists already !
Parameters: %1 = --
Definitions: The file name entered is already in this directory.
Remedy: --
105003
Workpiece %1 exists already
Parameters: %1 = --
Definitions: The workpiece name entered is already in this directory.
Remedy: --
105004
Paste buffer is empty! First COPY then PASTE
Definitions: No file could be inserted, as no file was copied to the clipboard.
Remedy: --
105005
Only tools can be inserted here
Definitions: The file type of the previously copied file is not _wpd and cannot be inserted into the work-
piece directory.
Remedy: --
105006
Only files can be inserted here
Definitions: A file of the file type _wpd, i.e. a workpiece, was copied from the workpiece directory and
an attempt was made to insert it into a program directory.
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
Overview of Alarms
2-573