Siemens SINUMERIK 840D sl Series Diagnostics Manual page 579

08/2005
107021
MCU.INI: Number of axes incorrect
Definitions: --
Remedy: --
107022
MCU.INI: File does not exist / contains error (%1)
Parameters: %1 = --
Definitions: --
Remedy: --
107023
MCU.INI: Data for an axis contain error
Definitions: --
Remedy: --
107024
MCU.INI: Not all axes specified
Definitions: --
Remedy: --
107031
MCU: Command unknown
Definitions: --
Remedy: --
107032
MCU: Error in server management block
Definitions: --
Remedy: --
107033
MCU: No table management block available
Definitions: --
Remedy: --
107034
MCU: Error in table management block
Definitions: --
Remedy: --
107035
MCU: Tool data not saved
Definitions: --
Remedy: --
107036
MCU: Tool data not stored on FEPROM
Definitions: --
Remedy: --
107041
MCU: Incorrect value for work offset
Definitions: --
Remedy: --
107042
MCU: Incorrect value for feedrate
Definitions: --
Remedy: --
107043
MCU: Value of traversing path / position incorrect
Definitions: --
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
Overview of Alarms
2-579