Siemens SINUMERIK 840D sl Series Diagnostics Manual page 551

08/2005
100934
Remote diagnostics: Error 10 -SendFileToRemote()- %1
Parameters: %1 = --
Definitions: --
Remedy: --
100935
Remote diagnostics: No response from remote PC (timeout)
Definitions: --
Remedy: --
100936
Remote diagnostics:Remote diag. port at default setting(5800)!
Definitions: --
Remedy: --
100937
Remote diagnostics: Connection established to %1
Parameters: %1 = --
Definitions: --
Remedy: --
100938
Delete a connection in menu Start-up>>Log.drive>>Conn.
Definitions: --
Remedy: --
101000
No connection to PLC !
Definitions: The connection to the PLC cannot be made while booting, e.g. wrong PLC basic pro-
gram.
Remedy: --
101001
Cannot read PLC system status list !
Definitions: After the connection has been made, the system status list cannot be read.
Remedy: Switch controller off/on
101002
Password is not valid !
Definitions: The password entered is wrong.
Remedy: Enter a valid password.
101003
Password has been set for %1 !
Parameters: %1 = Access-level system, manufacturer, service or user.
Definitions: The password for system, manufacturer, service or user was set successfully.
Remedy: --
101004
Password has been changed for %1 !
Parameters: %1 = Access-level system, manufacturer, service or user.
Definitions: The password for system, manufacturer, service or user was changed successfully.
Remedy: --
101005
Passwords do not correspond !
Definitions: When the password was changed, the password entered first does not match the one
entered second.
Remedy: Enter a valid password.
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
Overview of Alarms
2-551