Siemens SINUMERIK 840D sl Series Diagnostics Manual page 162

Overview of Alarms
%3 = Source symbol
Definitions: In the part program, in the machine data file (..._TEA) and in the initialization file (..._INI),
no more than 2 machine data may be used per block.
Example:
N ...
N 100 $MN_OVR_FACTOR_FEEDRATE [10] = 15,
$MN_OVR_FACTOR_FEEDRATE [11] = 20
N ...
Reactions: - Correction block
- Interface signals are set.
- Alarm display.
Remedy: Press the NC Stop key and select the function "Correction block" with the softkey PRO-
GRAM CORRECT. The correction pointer positions on the incorrect block.
• Divide up the part program block into several blocks.
• If necessary, use the local variable for storing intermediate results.
Program Con- Clear alarm with NC START or RESET key and continue the program.
tinuation:
12520
Channel %1 block %2 too many tool parameters %3
Parameters: %1 = Channel number
%2 = Block number, label
%3 = Source symbol
Definitions: In the part program, in the tool offset file (..._TOA) and in the initialization file (..._INI), no
more than 5 tool offset parameters may be used per block.
Example:
N ...
N 100 $TC_DP1 [5,1] = 130, $TC_DP3 [5,1] = 150.123,
$TC_DP4 [5,1] = 223.4, $TC_DP5 [5,1] = 200.12,
$TC_DP6 [5,1] = 55.02
N ...
Reactions: - Correction block
- Interface signals are set.
- Alarm display.
Remedy: Press the NC Stop key and select the function "Correction block" with the softkey PRO-
GRAM CORRECT. The correction pointer positions on the incorrect block.
• Divide up the part program block into several blocks.
• If necessary, use the local variable for storing intermediate results.
Program Con- Clear alarm with NC START or RESET key and continue the program.
tinuation:
12530
Channel %1 block %2 invalid index for %3
Parameters: %1 = Channel number
%2 = Block number, label
%3 = Source string
Definitions: In macro definitions, an attempt was made to define a G function with more than 3
decades or an M function with more than 2 decades as identifier of the macro.
Example:
_N_UMAC_DEF DEFINE G4444 AS G01 G91 G1234
2-162
DEFINE M333 AS M03 M50 M99
:
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
© Siemens AG, 2005. All rights reserved
08/2005