Siemens SINUMERIK 840D sl Series Diagnostics Manual page 2

SINUMERIK® Documentation
Printing history
Brief details of this edition and previous editions are listed below.
The status of each edition is shown by the code in the "Remarks" column.
Status code in the "Remarks" column:
A .... New documentation
B .... Unrevised reprint with new order number
C .... Revised edition with new status
Edition Order No.
09.95 6FC5298-3AA01-0BP0
03.96 6FC5298-3AA20-0BP0
08.97 6FC5298-4AA20-0BP0
12.97 6FC5298-4AA20-0BP1
12.98 6FC5298-5AA20-0BP0
08.99 6FC5298-5AA20-0BP2
04.00 6FC5298-5AA20-0BP2
10.00 6FC5298-6AA20-0BP0
09.01 6FC5298-6AA20-0BP1
02.02 6FC5298-6AA20-0BP2
11.02 6FC5298-6AA20-0BP3
03.04 6FC5298-7AA20-0BP0
10.04 6FC5298-7AA20-0BP1
08.05 6FC5298-7AA20-0BP2
Trademarks
SIMATIC®, SIMATIC HMI®, SIMATIC NET®, SIROTEC®, SINUMERIK® and SIMODRIVE® are Siemens trademarks.
Other product names used in this documentation may be trademarks which, if used by third parties, could infringe the rights
of their owners.
More information is available on the Internet at:
http://www.siemens.com/motioncontrol
This publication was created using FrameMaker V7.0.
© Siemens AG, 1995-2005. All rights reserved
Order No. 6FC5298-7AA20-0BP2
Printed in Germany
Remarks
Description of differences
C
C
C
C
C
C
C
C
C
C
C
C
C
Other functions not described in this documentation may be execut-
able in the control. This does not, however, represent an obligation to
supply such functions with a new control or when servicing.
We have checked the contents of this manual for agreement with the
hardware and software described. Since deviations cannot be pre-
cluded entirely, we cannot guarantee full conformity. However, the
data in this manual is reviewed regularly and any necessary correc-
tions will be included in subsequent editions. Suggestions for im-
provement are welcome.
Subject to change without prior notice
Siemens Aktiengesellschaft