Siemens SINUMERIK 840D sl Series Diagnostics Manual page 577

08/2005
A recompilation is not possible.
Remedy: --
105054
Error on calling of description of cycles !
Definitions: One of the sc.com, cov.com cycle description files contains a non-interpretable parame-
ter.
Initilization of the cycles is aborted.
Remedy: --
105060
Please wait: initialization of cycles support
Definitions: The cycle description files are interpreted and prepared for display on the screen.
Remedy: --
105061
Error on opening of file %1 !
Parameters: %1 = --
Definitions: The specified file could not be opened.
System-internal error that does not occur in normal operation.
Remedy: --
105062
Error on closing of file %1 !
Parameters: %1 = --
Definitions: The specified file could not be closed.
System-internal error that does not occur in normal operation.
Remedy: --
105063
Error on positioning in file %1 !
Parameters: %1 = File name
Definitions: No positioning could be done in the specified file.
System-internal error that does not occur in normal operation.
Remedy: --
105064
Error on reading file %1 !
Parameters: %1 = --
Definitions: The specified file could not be read.
System-internal error that does not occur in normal operation.
Remedy: --
105070
Please wait: initialization of simulation started !
Definitions: The graphic travel path is being initialized.
Remedy: --
105071
Simulation could not be loaded!
Definitions: --
Remedy: --
105072
Error while activating the file!
Definitions: --
Remedy: --
105075
Channel %1 not enough geo axes, contour definition not%npossible!
Parameters: %1 = --
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
Overview of Alarms
2-577