Siemens SINUMERIK 840D sl Series Diagnostics Manual page 581

08/2005
107065
MCU: Tool offset number (D.) not permissible (0 ... 20) !
Definitions: --
Remedy: --
107066
MCU: During a dwell time, only M functions are permissible !
Definitions: --
Remedy: --
107067
MCU: Insertion of a block not possible !
Definitions: --
Remedy: --
107068
MCU: Subroutine call allowed only with quantity !
Definitions: --
Remedy: --
107069
MCU: Appending a block not possible !
Definitions: --
Remedy: --
107080
MCU: Unknown error at %1
Parameters: %1 = --
Definitions: --
Remedy: --
107081
MCU: Command being processed (%1) !
Parameters: %1 = --
Definitions: --
Remedy: --
107082
MCU: Command number unknown (%1) !
Parameters: %1 = --
Definitions: --
Remedy: --
107083
MCU: Acknowledgment op code wrong (%1) !
Parameters: %1 = --
Definitions: --
Remedy: --
107084
MCU: Drive not digital (%1) !
Parameters: %1 = --
Definitions: --
Remedy: --
107085
MCU: Servo number unknown (%1) !
Parameters: %1 = --
Definitions: --
Remedy: --
107086
MCU: Wait for stop acknowledgment (%1) !
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
Overview of Alarms
2-581