Toshiba GR200 Series Instruction Manual page 797

Defining SBO mode
Figure 4.8-53 exemplifies the DPOS01 logic node saved as "CSWI4". In the SBO mode, the user
should select the following items for the "CSWI4$Pos" using GR-TIEMS:
Figure 4.8-53 LN editing screen for SBO mode (for example)
Defining DIR mode
Figure 4.8-54 exemplifies the DPOS01 logic node saved as save as "CSWI4". In the DIR mode,
the following three items should be selected using GR-TIEMS.
Figure 4.8-54 LN editing screen for DIR mode (for example)
SBOw

Oper

Cancel

Origin

stSeld

sboClass† (choice "operate-once")

ctlmodel (choice "SBOes or SBOns")

†"sboClass" can be found by scrolling down.
Oper

origin

ctlmodel (choice "DOes or DOns" )

- 776 -
6F2S1915 (0.46)
GRZ200 (Soft 031 & 032)