Hitachi H8S/2646 Hardware Manual page 380

• When TGR is an input capture register
When input capture occurs, the value in TCNT is transferred to TGR and the value previously
held in the timer general register is transferred to the buffer register.
This operation is illustrated in figure 10-17.
Input capture
signal
Buffer register
Example of Buffer Operation Setting Procedure: Figure 10-18 shows an example of the buffer
operation setting procedure.
Buffer operation
Select TGR function
Set buffer operation
Start count
<Buffer operation>
Figure 10-18 Example of Buffer Operation Setting Procedure
348
Timer general
register
Figure 10-17 Input Capture Buffer Operation
[1] Designate TGR as an input capture register or
[2] Designate TGR for buffer operation with bits
[1]
[3] Set the CST bit in TSTR to 1 to start the count
[2]
[3]
output compare register by means of TIOR.
BFA and BFB in TMDR.
operation.
TCNT