Mitsubishi Electric 800 Series Instruction Manual page 177

Hide thumbs Also See for 800 Series:

Table of Contents

 Initial setting with the GOT1000 series

• Set Pr.999 = "11" to configure the GOT initial setting.

• Always perform an inverter reset after the initial setting.

• For details on connection with GOT, refer to the Instruction Manual of GOT.

 Rated frequency (Pr.999 = "20 (50 Hz), 21 (60 Hz)")

Base frequency

Multi-speed setting (high speed)

Acceleration/deceleration reference

Speed display

Frequency monitoring reference

Stall prevention operation reduction

starting frequency

Terminal 2 frequency setting gain frequency 60 Hz

Terminal 4 frequency setting gain frequency 60 Hz

Subtraction starting frequency

Power failure deceleration time switchover

Frequency for maximum input pulse

% setting reference frequency

Speed setting reference

Auxiliary motor 1 starting frequency

Auxiliary motor 2 starting frequency

Auxiliary motor 3 starting frequency

Terminal 1 gain frequency (speed)

Running speed after emergency drive retry

5. PARAMETERS

5.4 (E) Environment setting parameters

Initial value

Pr.999 = "21"

Pr.999 = "20"

Refer to page

Chapters

Table of Contents