Mitsubishi Electric 800 Series Instruction Manual page 513

• Operation mode/inverter setting
Mode Read value
EXT H0000
PU H0001
EXT H0002
JOG
PU H0003
JOG
NET H0004
PU+EXT H0005
*8 Enable/disable parameter writing by Pr.79 and Pr.340 settings. For the details, refer to
Restrictions in each operation mode conform with the computer link specification.
• Real-time monitor
Refer to page 274 for the register numbers and monitored items of the real time monitor.
• Parameters
Pr. Register
0 to 999 41000 to
41999
902 41902
902 42092
43902
125 (903) 41903
903 42093
43903
904 41904
904 42094
43904
905 41905
905 42095
43905
917 41917
917 42107
43917
918 41918
918 42108
43918
919 41919
919 42109
43919
920 41920
920 42110
43920
930 41930
930 42120
931 41931
931 42121
512
5. PARAMETERS
5.12 (N) Operation via communication and its settings
Write value
*8
H0010
*8
H0011
―
―
H0014
―
Name
For details on parameter names, refer
to the parameter list (page 108).
Terminal 2 frequency setting bias
(frequency)
Terminal 2 frequency setting bias
(analog value)
Terminal 2 frequency setting bias
(terminal analog value)
Terminal 2 frequency setting gain
(frequency)
Terminal 2 frequency setting gain
(analog value)
Terminal 2 frequency setting gain
(terminal analog value)
Terminal 4 frequency setting bias
(frequency)
Terminal 4 frequency setting bias
(analog value)
Terminal 4 frequency setting bias
(terminal analog value)
Terminal 4 frequency setting gain
(frequency)
Terminal 4 frequency setting gain
(analog value)
Terminal 4 frequency setting gain
(terminal analog value)
Terminal 1 bias frequency (speed)
Terminal 1 bias (speed)
Terminal 1 bias (speed) (terminal
analog value)
Terminal 1 gain frequency (speed)
Terminal 1 gain (speed)
Terminal 1 gain (speed) (terminal
analog value)
Terminal 1 bias command (torque)
Terminal 1 bias (torque)
Terminal 1 bias (torque) (terminal
analog value)
Terminal 1 gain command (torque)
Terminal 1 gain (torque)
Terminal 1 gain (torque) (terminal
analog value)
Current output bias signal
Current output bias current
Current output gain signal
Current output gain current
page 213.
Read/Write
Read/Write The parameter number + 41000 is the register number.
Read/Write
Read/Write Analog value (%) set to Pr.902
Read Analog value (%) of voltage (current) applied to
terminal 2
Read/Write
Read/Write Analog value (%) set to Pr.903
Read Analog value (%) of voltage (current) applied to
terminal 2
Read/Write
Read/Write Analog value (%) set to Pr.904
Read Analog value (%) of current (voltage) applied to
terminal 4
Read/Write
Read/Write Analog value (%) set to Pr.905
Read Analog value (%) of current (voltage) applied to
terminal 4
Read/Write
Read/Write Analog value (%) set to Pr.917
Read Analog value (%) of voltage applied to terminal 1
Read/Write
Read/Write Analog value (%) set to Pr.918
Read Analog value (%) of voltage applied to terminal 1
Read/Write
Read/Write Analog value (%) set to Pr.919
Read Analog value (%) of voltage applied to terminal 1
Read/Write
Read/Write Analog value (%) set to Pr.920
Read Analog value (%) of voltage applied to terminal 1
Read/Write
Read/Write Analog value (%) set to Pr.930
Read/Write
Read/Write Analog value (%) set to Pr.931
Remarks