Mitsubishi Electric 800 Series Instruction Manual page 90

Pr. Pr. Name
group
79 D000 Operation mode
selection
125 T022 Terminal 2 frequency
setting gain
frequency
126 T042 Terminal 4 frequency
setting gain
frequency
160 E440 User group read
selection
934 A630 PID display bias
coefficient
934 A631 PID display bias
analog value
935 A632 PID display gain
coefficient
935 A633 PID display gain
analog value
991 E105 PU contrast
adjustment
998 E430 PM parameter
initialization
999 E431 Automatic parameter
setting
1136 A670 Second PID display
bias coefficient
1137 A671 Second PID display
bias analog value
1138 A672 Second PID display
gain coefficient
1139 A673 Second PID display
gain analog value
*1 Initial value for the FR-F860-00027.
*2 Initial value for the FR-F860-00061 and FR-F860-00090.
*3 Initial value for the FR-F860-00170 or higher.
*4 For the FR-F860-00680 or lower.
*5 For the FR-F860-01080 or higher.
*6 Initial value for the FR-F860-00090 or lower.
Unit Initial Range
value
1 0 0 to 4, 6, 7
0.01 Hz 60 Hz 0 to 590 Hz
0.01 Hz 60 Hz 0 to 590 Hz
1 0 0, 1, 9999
0.01 9999 0 to 500,
9999
0.1% 20% 0 to 300%
0.01 9999 0 to 500,
9999
0.1% 100% 0 to 300%
1 58 0 to 63
1 0 0, 8009,
8109, 9009,
9109
1 9999 1, 2, 10, 11,
12, 13, 20,
21, 9999
0.01 9999 0 to 500,
9999
0.1% 20% 0 to 300%
0.01 9999 0 to 500,
9999
0.1% 100% 0 to 300%
Application
Select the start and frequency command
sources.
Allows the frequency at the maximum
potentiometer setting (5 V in the initial setting) to
be changed.
Allows the frequency at the maximum current
input (20 mA in the initial setting) to be changed.
Restricts the parameters that are read by the
operation panel and the parameter unit.
Adjust the bias value and the gain value that are
displayed in relation to PID control.
Contrast adjustment of the operation panel and
the parameter unit can be performed.
Selects the PM sensorless vector control and
set the parameters that are required to drive a
PM motor.
Changes parameter settings as a batch. The
target parameters include communication
parameters for the Mitsubishi Electric human
machine interface (GOT) connection and the
parameters for the rated frequency settings of
50 Hz/60 Hz.
Adjust the bias value and the gain value that are
displayed in relation to second PID control.
4.1 Frequently-used parameters (simple mode parameters)
Refer to
page
3
204
101, 328
4
103, 328
5
177
421
4
5
165
6
151
7
173
8
421
9
10
89
4. BASIC OPERATION