5.6 (D) Operation Command And Frequency Command - Mitsubishi Electric 800 Series Instruction Manual

5.6
(D) Operation command and frequency command
Purpose
To select the operation mode
To start up in Network operation mode
at power-ON
To select the command source during
communication operation
To prevent motor from rotating
reversely
To set the frequency by pulse train
input
To perform JOG operation
To control frequency with
combinations of terminals
Parameter to set
Operation mode selection
Communication startup mode
selection
Operation and speed command
sources during communication
operation, command source
selection
Reverse rotation prevention
selection
Pulse train input
JOG operation
Multi-speed operation
P.D000 Pr.79
P.D000, P.D001 Pr.79, Pr.340
P.D010 to P.D013 Pr.338, Pr.339,
Pr.550, Pr.551
P.D020 Pr.78
P.D100, P.D101, Pr.291, Pr.384 to
P.D110, P.D111 Pr.386
P.D200, P.F002 Pr.15, Pr.16
P.D300 to P.D315 Pr.28, Pr.4 to Pr.6,
Pr.24 to Pr.27,
Pr.232 to Pr.239

5.6 (D) Operation command and frequency command

3
Refer to
page
4
204
213
5
214
5
221
222
5
224
226
6
7
8
9
10
203
5. PARAMETERS