Mitsubishi Electric 800 Series Instruction Manual page 645

• FR-A8NF
Inverter status monitor
Bit Signal name
14 READY signal
• FR-A8NL
Inverter output signal (network output SNVT_state nvoInvOutputSig)
Bit Signal name
15 Ready signal
*1 The value in the bit turns to 1 when power is supplied to the control circuit only.
644
9. APPENDIX
9.4 Ready bit status selection (Pr.349, N240)
Reset cancel Pr.349 = "0, 1"
N240 = "0"
Pr.349 = "100, 101"
N240 = "1"
Pr.349 = "0, 1" The value in the bit turns to 1 when the inverter is ready for operation after power-
N240 = "0" *1
ON.
Pr.349 = "100, 101" The value in the bit turns to 1 when the RY signal turns ON.
N240 = "1"
Description
0: During an inverter reset / during startup after power-ON.
1: During normal operation
0: RY signal is OFF
1: RY signal is ON
Description