Mitsubishi Electric 800 Series Instruction Manual page 514

Pr. Register
932 41932 Terminal 4 bias command (torque)
932 42122 Terminal 4 bias (torque)
43932 Terminal 4 bias (torque) (terminal
analog value)
933 41933 Terminal 4 gain command (torque)
933 42123 Terminal 4 gain (torque)
43933 Terminal 4 gain (torque) (terminal
analog value)
934 41934 PID display bias coefficient
934 42124 PID display bias analog value
43934 PID display bias analog value
(terminal analog value)
935 41935 PID display gain coefficient
935 42125 PID display gain analog value
43935 PID display gain analog value
(terminal analog value)
1000 to 45000 to For details on parameter names, refer
1999 45999 to the parameter list
• Fault history
Register Definition
40501 Fault record 1
40502 Fault record 2
40503 Fault record 3
40504 Fault record 4
40505 Fault record 5
40506 Fault record 6
40507 Fault record 7
40508 Fault record 8
• Model information monitor
Register
44001 Model (First and second characters)
44002 Model (Third and fourth characters)
44003 Model (Fifth and sixth characters)
44004 Model (Seventh and eighth characters)
44005 Model (Ninth and tenth characters)
44006 Model (Eleventh and twelfth characters)
44007 Model (Thirteenth and fourteenth characters)
44008 Model (Fifteenth and sixteenth characters)
44009 Model (Seventeenth and eighteenth characters)
44010 Model (Nineteenth and twentieth characters)
44011 Capacity (First and second characters)
44012 Capacity (Third and fourth characters)
44013 Capacity (Fifth and sixth characters)
NOTE
• When a 32-bit parameter setting or monitored value is read and the read value exceeds HFFFF, the reply data will be
HFFFF.
Name
(page 108).
Read/Write
Read/Write
Read
Read
Read
Read
Read
Read
Read
Definition
Read/Write
Read/Write
Read/Write Analog value (%) set to Pr.932
Read Analog value (%) of current (voltage) applied to
terminal 4
Read/Write
Read/Write Analog value (%) set to Pr.933
Read Analog value (%) of current (voltage) applied to
terminal 4
Read/Write
Read/Write Analog value (%) set to Pr.934
Read Analog value (%) of current (voltage) applied to
terminal 4
Read/Write
Read/Write Analog value (%) set to Pr.935
Read Analog value (%) of current (voltage) applied to
terminal 4
Read/Write The parameter number + 44000 is the register number.
Remarks
Data is 2 bytes and so is stored in "H00".
The lowest 1 byte can be referred to for the error code.
(For details on error codes, refer to
The fault history is batch-cleared by writing to register
40501.
Set any value for the data.
Read/Write
Read Reading inverter type in ASCII code.
"H20" (blank code) is set for blank area.
Read
Example of FR-F860-3
Read
H46, H52, H2D, H46, H38, H36, H30, H2D,
Read
H33, H20......H20
Read
Read
Read
Read
Read
Read
Read The capacity in the inverter model can be
read in ASCII code.
Data is read in increments of 0.1 kW, and
Read
rounds down to 0.01 kW increments.
"H20" (blank code) is set for blank area.
Example
Read
0.75K........."7"
(H20, H20, H20, H20, H20, H37)
5.12 (N) Operation via communication and its settings
Remarks
page 568.)
Remarks
5. PARAMETERS
3
4
5
5
5
6
7
8
9
10
513