Mitsubishi Electric C80 Series Instruction Manual page 109

C80 Series Instruction Manual
3 Inputting a Machining Program and Defining Variables
Operation method (Opening the existing machining programs of the same name in the 1st and 4th part systems
(When the 1st part system is set as the displayed part system))
Perform the following procedure to open the machining program, "200", under the following conditions.
The parameter "#8977 Multi-$ simul edit" is set to "1" (valid).
The machining program, "200", is registered in the 1st and 4th part systems of NC memory.
(1) Press the menu [Open].
(2) Use the [↑], [↓], [←], and [→] keys to align the cursor
with the target machining program (200), and press
the [INPUT] key.
The same operation can also be performed by input-
ting the machining program name (200) to be edited
in the input section and pressing the [INPUT] key.
Operation method (Opening the existing machining programs only in the 1st part system (When the 1st part system
is set as the displayed part system))
Perform the following procedure to open the machining program, "300", under the following conditions.
The parameter "#8977 Multi-$ simul edit" is set to "1" (valid).
The machining program, "300", is registered in the 1st part system of NC memory.
(1) Press the menu [Open].
(2) Use the [↑], [↓], [←], and [→] keys to align the cursor
with the target machining program (300), and press
the [INPUT] key.
The same operation can also be performed by input-
ting the machining program name (300) to be edited
in the input section and pressing the [INPUT] key.
IB-1501453-C
The list appears as a pop-up window.
The machining program "200" in the 1st part system is
displayed in the currently selected editing area, and the
machining program "200" in the 4th part system is dis-
played in the deselected editing area.
The list appears as a pop-up window.
The machining program "300" in the 1st part system is
displayed in the currently selected editing area, and the
machining program opened in the deselected editing
area is closed.
84