Mitsubishi Electric C80 Series Instruction Manual page 143

C80 Series Instruction Manual
4 Inputting and Outputting a Machining Program
Batch output and verify from NC memory
Example of "NC memory -> the external device" of machining program batch transfer
NC memory
1000
(TEST)
N1G28X0.Y0.Z0.
:
N999M02
%
TAP.PRG
(TAP01)
G84W-100.R0.P2000
:
M30
%
:
:
9999
G92X0.Y0.Z0.
:
M30
%
(1) Use the [←] or [|←] key to select file setting column
A on the I/O screen of the edit screen.
(2) Designate the transfer source device (memory).
(3) Press the menu [Program all].
Do not specify the file name. If the name is specified,
an error will occur.
(4) Use the [→] or [→|] key to select file setting column
B.
(5) Designate the transfer direction device and directory.
(6) Designate the transfer direction file to input multiple
machining programs.
When the file name is not designated, output to the
file "ALL.PRG" of the designated directory.
(7) Press the menu [Transfr A→B].
(8) Press the [Y] or [INPUT] key.
When the same machining program already exists in
transfer direction device, the operation message
"Overwrite this file?(Y/N)" appears. The transferring
the following program is continued by selecting [Y] or
[N] key.
IB-1501453-C
External device
(USB memory etc.)
PROCESS01
*
(Blank line)
O1000(TEST)
N1G28X0.Y0.Z0.
:
N999M02
OTAP.PRG(TAP01)
G84W-100.R0.P2000
Transfer
:
M30
:
:
O9999
G92X0.Y0.Z0.
:
M30
%
118
File transfer is commenced. Transmitting data is dis-
played in input data display column.
The operation message "Transfer complete" appears
upon the completion of transmission.