Mitsubishi Electric C80 Series Instruction Manual page 270

C80 Series Instruction Manual
6 Setting Parameters
Display items
Display items
(1) Application
(2) Parameter No.
(3) Parameter name
(4) Std parameter
(5) Machining condition
parameter set
Menus
Menus
Switches the application being set to other application.
App
It switches from Application1 -> Application2 -> Application3 -> Application1 -> ... each time this menu
change
key is pressed.
Sets the application name for the application being set.
AppName
The name with up to 12 one-byte characters of numeric, English capital letter, and symbol can be set.
set
<Note>
However, "\", "/", ",", "*", """, "<", ">", "|", and "space" cannot be used as a one-byte symbol.
Copies the setting values corresponding to the standard parameters to the all machining condition pa-
Execute
rameter sets.
init.
Changes to the machining condition selection screen.
Cond
select
This closes the pop-up window and quits this function.
Close
Initializing the machining condition parameter set
(1) Press the menu [MacCond] in the setup screen.
(2) Select the menu [Cond set] in the "Machining cond"
screen.
(3) Select the menu [Execute init].
(4) Press the [Y] or [INPUT] key.
Displays the application being set.
To change to the next machining purpose, press the menu [App change].
When machining purpose being selected, the background is emphasized in red.
The background is not highlighted while the Standard parameter is selected.
Displays the number of a standard parameter.
Displays the name of a standard parameter.
Displays the value of the standard parameter designated on the parameter screen.
This item is not displayed when the machining parameter "#12066 Tolerance ctrl ON"
is set to "0".
<Note>
"#2659 tolerance" indicates the setting value of the 1st axis in the 1st part system.
Displays three sets of machining condition parameter set which belongs to the appli-
cation purpose being set.
The background of the selected machining condition is highlighted in red.
The background is not highlighted while the Standard parameter is selected.
245
Details
Details
The setting value for the standard parameters corre-
sponding to each machining condition parameter will be
copied.
IB-1501453-C