Operation Search - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
9 Machining a Workpiece
9Machining a Workpiece
This chapter mainly describes the functions set on the monitor (Monitr) screen.

9.1 Operation Search

Monitr
Search
On this screen, the program can be called from the program storage site, such as a memory, by designating the program
(program No.) to be automatically run and the program start position (sequence No., block No.).
When the multi-part system program management is valid (#1285 ext21/bit0 =1, ext21/bit1 =1) and [Memory] is selected
as a device, the program search is executed across all part systems in batch.
The device [Memory card] and [USB Memory] are not selectable with this function.
(1)
(2)
(3)
(4)
Display items
Display items
(1) Device name, directory
display
(2) Capacity display
(3) List of directories and
files
(4) Input section
IB-1501453-C
This displays the device and directory where the searched machining program is lo-
cated.
This displays the capacity of the device displayed in (1).
This displays a list of the contents contained in the device or directory displayed in (1).
Use and to scroll the displayed list.
The comment of the machining program is displayed in the <Date/Comment> column.
Whether to show or hide the comment field can be selected by pressing the menu
[Comment nondisp]. When the comment field is hidden, the file name field will be en-
larged. (Up to 13 characters can be displayed in the file name field when the comment
is shown, and 32 when the comment is hidden.)
If the file name exceeds the maximum number of characters, "*" will appear at the last
character.
This displays details of the key input.
276
Details