Mitsubishi Electric C80 Series Instruction Manual page 343

C80 Series Instruction Manual
9 Machining a Workpiece
Menus
Menus
This starts the restart search based on the designated device, directory, program number (O), se-
Search
quence number (N), block number (B) and number of block execution times (P).
exec
This changes to the pop-up window for executing top search, and enables top search.
Top
When the type 1 is selected or the parameter "#8914 Auto Top search" is set to "1", this menu cannot
search
be selected.
This selects the restart search type. Restart search is executed with the highlighted restart type.
Type1
The type 1 or type 2 menu is always highlighted.
When restart search is executed, the selected restart type is displayed at the display item (3) "Restart
type".
Type2
This changes to the pop-up window for setting the file, and enables the file to be selected.
File
set
This switches the axis to be displayed on the counter. (*1)
Next
axis
This opens the MSTB history screen as a pop-up window.
MSTB
The M, S, T and B command used in the machining program are listed on the MSTB history screen. If
history
the cursor is moved to the listed M, S, T or B command and the [INPUT] key is pressed, that command
will be executed.
This closes the pop-up window and quits this function.
Close
(*1) The menu will be grayed out and cannot be selected when the number of valid axes is six or less.
IB-1501453-C
Details
318