Transferring A File - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
4 Inputting and Outputting a Machining Program

4.3 Transferring a File

Edit
I/O
This section explains the method used to transfer files between different devices, or between the same device on the I/O
screen of the edit (Edit) screen.
Refer to "4.2 Selecting a Device, Directory and File" for details of the device, directory, and file specification method.
Operation method
(1) Use the [←] or [|←] key to select file setting column
A on the I/O screen of the edit screen.
(2) Designate the transfer source device, directory and
file name.
(3) Use the [→] or [→|] key to select file setting column
B.
(4) Designate the transfer destination device, directory
and file name.
(5) Press the menu [Trnsfr A→B].
Press the menu [Trnsfr B→A] when transferring from
device B to device A.
(6) Press the [Y] or [INPUT] key.
CAUTION
" ; ", "EOB", "%", and "EOR" are symbols used for explanation. The actual codes for ISO are "CR, LF" ("LF")
and "%". "%" and "EOR" are represented by "%" in ISO. The programs created on the edit screen are stored in the
NC memory in a "CR, LF" format, however, the programs created with external devices may be stored in an "LF" for-
mat. The actual codes for EIA are "EOB (End of Block)" and "EOR (End of Record)".
To prevent influence from data omission and data transformation in the communication circuit, always verify
the data after inputting and outputting machining programs.
The designated file displays in file setting column A.
A wildcard "*" can be used for the file name to designate
multiple files.
File transfer is commenced. The process progress dis-
play area displays message indicating that transfer is in
progress, and also indicates the transfer direction.
The data being merged appears in the input/comparison
data display area input data display column.
A message appears indicating a transfer completion af-
ter transfer has been completed.
105 IB-1501453-C