Operating The Screen By Touch Gestures - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
2 Screen Operations
Entering data when the input area is disabled
If software keyboard is displayed while edit window is displayed for program editing or input area is not displayed on a
screen, or when the monitor screen main menu is displayed, software keyboard input area will be invalid. At this time, the
key selected on the software keyboard is directly input to the screen.
(1) Display the edit window on the monitor screen and
touch the [S/W Key] button.
(2) Touch the [↑], [↓], [|←], [→|] keys to move the cursor
to an arbitrary position.
(3) Touch the data setting key and enter the value.
Example: G28
(4) Touch the [INPUT] key.

2.6.3 Operating the Screen by Touch Gestures

The screen can also be operated by touch gestures.
This function can be used with the project which is created by "GT Designer3" Ver. 1.195D or later.
(1) Changing the menu display (Right-/left-flick)
If you flick the menu horizontally (quickly run your fingertip horizontally along the screen), the menu changes to the pre-
vious or next menu.
(2) Scrolling the displayed data (Up/down flick, drag)
If you flick the screen vertically (quickly run your fingertip across the screen) to edit a program or process various table
data items such as the compensation amount and common variable, or you drag the screen (touch the surface and
move your finger without up and down losing contact), the displayed data is scrolled.
(3) Changing a page (Right- or left-flick)
If you flick a page horizontally (quickly run your fingertip horizontally along the screen) to display the workpiece coordi-
nate system offset or guidances such as the alarm and parameter guidances, the page changes to the right or left page.
(4) Displaying the next axis/next part system with right- or left-flick
If you flick (quickly run your fingertip horizontally along the screen) horizontally on the parameter screen, etc., the axis
or part system to be displayed can be switched.
(5) Selecting or determining a file (Double-tap)
If you double-tap a target file on the file list screen, operations such as "Search execution", "Open file", and "Erase file"
can be performed in the same way as when the [INPUT] key is pressed. However, the value of the input section is ig-
nored.
[Gesture operation enabled judgment]
When you move your fingertip from the gesture-enabled range to the outside while keeping your finger touching the screen,
the gesture operation is enabled until you take your finger off the screen. If you first touch the outside of the gesture-enabled
range, the gesture operation is disabled until you take your finger off the screen, even when you move your fingertip in the
gesture-enabled area.
IB-1501453-C
Software keyboard is displayed.
Software keyboard input area will be invalid.
The cursor for the edit window is moved.
"G28" is displayed in the edit window.
"G28" which has been input in the edit window is con-
firmed.
42