C80 Series Instruction Manual
5 Setting a Tool and a Workpiece
5.4.2 Switching the Input Method for the Tool Compensation Data
When a parameter "#8941 ABS/INC for T-ofs" is set to "1", the absolute/incremental input by the [INPUT] key can be
switched. When attempting to switch it, the current input mode is displayed on the upper left of the tool compensation
amount. The absolute/incremental input can be switched either by the short cut key ([I] key) or by pressing the menu [Abs/
Inc]. The chosen method is kept after switching the screen and turning the power OFF.
(1) Absolute input mode
In this mode, the absolute input is applied when the tool compensation data is input by the [INPUT] key.
Displaying that this is the absolute input mode.
(2) Incremental input mode
In this mode, the incremental input is applied when the tool compensation data is input by the [INPUT] key.
Displaying that this is the incremental input mode.
151
IB-1501453-C