Counter All-Axis Display - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
9 Machining a Workpiece

9.2.6 Counter All-axis Display

Monitr
Cnt exp
A counter for all axes opens as a pop-up display.
The type of displayed counter can be selected with the menu.
Menus
Menus
This displays the currently executed position.
Relat
posn
This displays the G54 to G59 workpiece coordinate system modal No. and the workpiece coordinate
Work
position in that workpiece coordinate system.
co posn
This displays the coordinate position of each axis in the basic machine coordinate system having a char-
Machine
acteristic position, specified by the machine, as a zero point.
posn
This displays the remaining distance of the movement command being executed during automatic start
Remain
or automatic halt. (The remaining distance is the incremental distance from the current position to the
command
end point of that block.)
This displays the details of the command in the block executed after the block currently being executed.
Next
command
This displays the amount moved with the manual mode while the manual absolute switch was OFF.
Manual
When the parameter "# 8173 Hold intr amount" is set to "0", interrupt amount is cleared by pressing the
int amt
reset button.
This displays the value obtained by subtracting the tool compensation amount compensated for that
Program
axis from the position actually being executed for each axis.
posn
When the parameter "# 8173 Hold intr amount" is set to "0", interrupt amount is cleared by pressing the
reset button.
This closes the pop-up window and quits this function.
Close
This displays the position of the tool center from the workpiece coordinate reference position in the se-
Tip wk
lected workpiece coordinate system.
posn
IB-1501453-C
Details
298