Copying And Pasting Parameters - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
6 Setting Parameters

6.1.3 Copying and Pasting Parameters

Parameters can be copied and pasted in a parameter with the same number for another axis or part system.
Operation method (Specifying and copying the parameter where the cursor is located)
(1) Press the menu [Area copy].
(2) Move the cursor to the position of the parameter to be
copied and press the [INPUT] key.
Operation method (Copying parameter numbers in a specific range)
(1) Move the cursor to the display area of the axis or part
system to be copied.
(2) Press the menu [Area copy].
(3) Designate the copy range.
Format: First No./Last No.
8701/8705 [INPUT]
An "E" can be used if the last number to be copied is
the last number in the currently displayed parameter
type.
(Example) 8701/E
Note
(1) The selected area color of the copied area returns to normal when the copied data is pasted. However, the copied range
can still be pasted until the parameter type display is changed.
(2) Only the currently displayed parameter type can be copied.
Operation method (Pasting the copied parameters)
(1) Move the cursor to the axis or part system display
area where the data will be pasted.
(2) Press the menu [Area paste].
(3) Press the [Y] or [INPUT] key.
The copied data is not written in when the [N] key is
pressed.
Note
(1) If the relevant parameter is changed after specifying the range to be copied, the value after the change is pasted.
IB-1501453-C
The copied data is written to the parameter with the
same number in the area where the cursor is positioned.
The menu highlight returns to normal.
240