Collation And Stop - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
9 Machining a Workpiece

9.4 Collation and Stop

Monitr
Col stp
The machining program operation can be block stopped at a registered collation and stop position. The registered collation
and stop position can be canceled.
When the specified block appears, NC status will change single block stop after the execution of the block.
The device [Memory card] and [USB Memory] are not selectable with this function.
When collation and stop is registered
When collation and stop position is displayed
331 IB-1501453-C