Mitsubishi Electric C80 Series Instruction Manual page 72

C80 Series Instruction Manual
2 Screen Operations
<After parameter change>
Precautions
(1) When you set the number which the main menu is not allocated with the menu selection parameter, the menu is not
displayed. Menu which is set with other menu non-display parameter ("#8923 Hide Edit-IO menu", "#8932 Hide measure
scrn") is also not displayed even if it is set with the menu selection parameter.
(2) A menu selection parameter setting will be reflected to the menu list.
(3) Menus which are allocated to the short cut key (it is enabled after the axis address is input), such as [Counter Set] and
[MST], become valid by pressing a short-cut key even if they are set as "Not display".
(4) When the parameter "#11032 Menu sel para lkof" (Menu select param setting enabled) is set to "0", the menu [Menu
select param] is not displayed.
(5) When the parameter "#11032 Menu sel para lkof (Menu select param setting enabled)" is set to "1" and the MTB pass-
word is not entered, the menu [Menu select param] appears, but the menu select param setting screen does not appear
even if you press the menu.
Menu on page 1
Menu on page 2
Menu on page 3
47 IB-1501453-C