Setting The Integrated Time - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
8 Other Setups
Menus
Menus
This sets the integrated time.
Time
setting
The time that is displayed in upper line on cycle time display area is selected.
Time
select1
The time that is displayed in bottom line on cycle time display area is selected.
Time
select2
This closes the pop-up window and quits this function.
Close

8.1.2 Setting the Integrated Time

Operation method
(1) Press the menu [Time setting].
(2) Input today's date.
(Example) 2015/4/1 [INPUT]
(3) Set the data for each item, and press the [INPUT]
key.
If the item does not need to be set, press the [↓] key
and move the cursor.
Note that #8 Cycle time cannot be set, so the cursor
will not move.
Note
(1) The data delimiters are as shown below:
Item
#1 Date
#2 Time to #7 Ext time2
#8 Cycle time
(2) If the [Time setting menu] or
celed.
Setting range
Display items
#1 Date
2 Time
3 Power ON
4 Auto oper
5 Auto strt
6 Ext time 1
7 Ext time 2
Details
Valid delimiters during setting
" ." or " / "
" : " or " / "
key is pressed again during the time setting mode, the time setting mode will be can-
1980.1.1 to 2069.12.31
00:00:00 to 23:59:59
00:00:00 to 59999:59:59
259
The mode changes to the time setting mode. The cursor
appears at the "#1 Date" position in the integrated time
display.
"2015.04.01" appears at "#1 Date", and the cursor
moves to "#2 Time".
When "#7 External integrated time 2" has been set, the
cursor disappears, and the time setting menu highlight is
turned OFF.
Delimiters in display
" ."
" : "
" : "
Range
IB-1501453-C