Carrying Out Rotation Measurement - Mitsubishi Electric C80 Series Instruction Manual
Hide thumbs
Also See for C80 Series:
- Manual (749 pages) ,
- Maintenance manual (162 pages) ,
- Connection and set up manual (304 pages)
Table of Contents
Advertisement
C80 Series Instruction Manual
5 Setting a Tool and a Workpiece
5.7.1.4 Carrying Out Rotation Measurement
When carrying out rotation measurement, the offset (rotation center and rotation angle) of the rotary coordinate system is
measured, and the results are set to the workpiece coordinate system offset (rotation center) and the parameters "#8623
Coord rot centr(H)", "#8624 Coord rot centr(V)", and "#8627 Coord rot angle".
<Measurement using touch probe>
Measurement counter X = X axis skip position
Measurement counter Y = Y axis skip position
<Simple measurement (measurement without using touch probe)>
Measurement counter X = X axis machine position + center compensation (H) + skip past amount (Horizontal axis) (*1)
Measurement counter Y = Y axis machine position + center compensation (V) + skip past amount (Vertical axis) (*1)
(*1) The skip past amount is added for only the axis that moved last.
The sign ( + or - ) of the past amount depends on the movement direction of the axis.
Center compensation (H)
Center compensation (V)
Skip past amount (H)
Skip past amount (H)
Operation method (Setting the center shift amount)
(1)
Press the menu [Rotate measure].
(2)
Press the menu [Center shift].
(3)
Input the center shift amount (Si).
10.000 [INPUT]
(4)
Input the center shift amount (Sj).
-5.000 [INPUT]
(5)
Press the menu [Center shift].
Item
211
Reference
"#8703 OFFSET X"
"#8704 OFFSET Y"
"#8707 Skip past amout(H)"
"#8708 Skip past amout(H)"
IB-1501453-C
Advertisement
Table of Contents
