Mitsubishi Electric C80 Series Instruction Manual page 440

C80 Series Instruction Manual
11 Performing a Backup Operation
Batch output and verify from NC memory
Example of "NC memory -> the external device" of machining program batch transfer
NC memory
1000
(TEST)
N1G28X0.Y0.Z0.
:
N999M02
%
TAP.PRG
(TAP01)
G84W-100.R0.P2000
:
M30
%
:
:
9999
G92X0.Y0.Z0.
:
M30
%
(1) Press the menu [Area change] to select file setting column A.
(2) Designate the transfer source device (memory).
(3) Press the menu [Dir] - [Program all].
Do not specify the file name. If the name is specified, an error will occur.
(4) Press the menu [Area change] to select file setting column B.
(5) Designate the transfer direction device and directory.
(6) Designate the transfer direction file to input multiple machining programs.
When the file name is not designated, output to the file "ALL.PRG" of the designated directory.
(7) Press the menu [Transfr A→B].
(8) Press the [Y] or [INPUT] key.
When the same machining program already exists in transfer direction device, the operation message "Overwrite this
file?(Y/N)" appears.
The transferring the following program is continued by selecting [Y] or [N] key.
(9) Press the menu [Compare A:B].
External device
(USB memory etc.)
PROCESS01
*
(Blank line)
O1000(TEST)
N1G28X0.Y0.Z0.
:
N999M02
OTAP.PRG(TAP01)
G84W-100.R0.P2000
Transfer
:
M30
:
:
O9999
G92X0.Y0.Z0.
:
M30
%
415 IB-1501453-C