Mitsubishi Electric C80 Series Instruction Manual page 211

C80 Series Instruction Manual
5 Setting a Tool and a Workpiece
Operation method (Erasing all groups) (M system/L system)
(1) Press the menu [Grp all delete].
(2) Press the [Y] or [INPUT] key.
Note
(1) If no group has been registered, the operation message "Can't delete all groups" will appears.
Operation method (Changing the group No.) (M system/L system)
(Example) Changing the group No. from 5 to 20
(1)
Use the [↑], [↓],
sor to group No. 5.
(2) Press the menu [Grp No.change].
(3) Designate the group No. after changing.
20 [INPUT]
Operation method (Changing to the group unit display) (M system/L system)
(Example) Displaying the group No. 5 tool life data.
(1)
Use the [↑], [↓],
sor to group No. 5.
(2) Press the menu [T-life group] or [INPUT] keys.
IB-1501453-C
, and keys to move the cur-
, and keys to move the cur-
All the registered groups and their tool life management
data is erased.
The menu is highlighted.
The group No. changes to "20".
The screen changes to the group unit display and the
group No. "5" tool life management data displays.
186