Mitsubishi Electric C80 Series Instruction Manual page 275

C80 Series Instruction Manual
7 Setting Machine Movable Area
(1) Stored stroke limit II (When prohibited range is on outside)
When used with the stored stroke limit I function, the narrow range designated by the two types becomes the movement
valid range.
The stored stroke limit I function is set by MTB.
(C)
2
(A): Set value for (-) side
(B): Set value for (+) side
(C): The following ranges prohibited by stored stroke limit II are set with the coordinate values in the basic machine co-
ordinate system.
Point 3: "#8205 OT-CHECK-P"
Point 4: "#8204 OT-CHECK-N"
Points 1 and 2 are the prohibited range set by MTB using the stored stroke limit I.
(2) Stored stroke limit IIB (When prohibited range is on inside)
A range except for that of the stored stroke limit I becomes the movement prohibited range.
4
2
(A): Set value for (-) side
(B): Set value for (+) side
(C): The following ranges prohibited by stored stroke limit IIB are set with the coordinate values in the basic machine
coordinate system.
Point 3: "#8205 OT-CHECK-P"
Point 4: "#8204 OT-CHECK-N"
Points 1 and 2 are the prohibited range set by MTB using the stored stroke limit I.
IB-1501453-C
4
(A)
3
(C)
(A)
(B)
1
3
(B)
1
250
: Movable range
: Prohibited range
: Movable range
: Prohibited range