Other Functions; Merging A File - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
4 Inputting and Outputting a Machining Program

4.8 Other Functions

Edit
I/O

4.8.1 Merging a File

This section explains the method used to add a file in file setting column B to a file in file setting column A on the I/O screen
of the edit (Edit) screen.
Refer to "4.2 Selecting a Device, Directory and File" for details of the device, directory, and file specification method.
Operation method
(1) Use the [←] or [|←] key to select file setting column
A on the I/O screen of the edit screen.
(2) Designate the merge destination device, directory,
and file name.
(3) Use the [→] or [→|] key to select file setting column
B.
(4) Designate the merge source device, directory, and
file name.
(5) Press the menu [Merg B→A].
(6) Press the [Y] or [INPUT] key.
Note
(1) If the merge destination file (file in file setting column A) is running, an error will occur, and the files will not be merged.
(2) Do not perform the file operation on the merge source and destination files during the merge. The file may be damaged
with the file operation.
IB-1501453-C
The file merge starts. The data being merged appears in
the input/comparison data display area input data dis-
play column. Furthermore, a message indicating that
merging is being performed, and an arrow from the
merge source (file setting column B) to the merge desti-
nation (file setting column A) display in the process prog-
ress display area.
A message appears when the merge is completed.
The details of the file in file setting column A will be as
follows when the merge is completed.
(FILE A)
G28 XYZ
G90 F800
G00 X100. Y100.;
(FILE B)
G91 G28 XYZ
F1000;
G01 X200. Y200.;
M02;
%
The details of the file in file setting column B do not
change.
112
Details of file in file setting
column A before merge.
Details of file in file setting
column B before merge.