Displayed Part System - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
2 Screen Operations

2.2.1 Displayed Part System

Changing the part system with
Press key to change the displayed part system.
The displayed part system No. is counted up by one each time the key is pressed. If the displayed part system No. exceeds
the parameter "#11055 Disp. sysno", the displayed part system No. returns to "1".
Changing the part system with a touchscreen
Displayed part system will change when the part system name on the touchscreen is pressed. The displayed part system
No. is counted up by one each time the key is pressed. If the displayed part system No. exceeds the parameter "#11055
Disp. sysno", the displayed part system No. returns to "1".
Restrictions when changing the displayed part system
The operation to change the displayed part system by the
"#11035 Sys. change limit".
Setting the color of displayed part system
The color combination for the top left of the screen can be changed with the setting of parameters "#8942 $1 color" to
"#8945 $4 color", "#8962 $5 color" to "#8964 $7 color". Each part system can have a unique color combination which makes
easy to understand the displayed part system.
When the part system is changed, the color of the upper left of the screen changes according to the setting with each pa-
rameter. A color set with "#8942 $1 color" will be displayed for the 1st part system.
When the color of displayed part system is changed, the display of part system name changes to the button image.
[Setting example] When "1" is set to the parameter "#8942 $1 color", "2" is set to the parameter "#8943 $2 color", and "0"
is set to the parameter "#11060 Screen theme color".
key
2nd part system: Pink
1st part system: Theme color
17
key or touchscreen is restricted by the setting of parameter
IB-1501453-C