Copying And Pasting The Tool Management Data - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
5 Setting a Tool and a Workpiece
Deleting the tool management data in [Disp details]
(1) Display the tool management screen.
If the details of tool management data is displayed,
press the menu [Disp details] and switch to the dis-
play of tool management data list.
(2) Use the [↑] or [↓] key to move the cursor onto the tool
number.
(3) Delete the selected data.
Menu [Tool clear]
The menu [Tool clear] is displayed only when the cur-
sor is located on the tool number.
(4) Press the [Y] or [INPUT] key.
To cancel the erasing, press a key other than [Y] or
[INPUT].
Note
(1) If you wish to change the tool data to be deleted, locate the cursor onto the tool management data list and select a tool
data again.

5.5.10 Copying and Pasting the Tool Management Data

Operation method
(1) Display the tool management screen.
(2) Use the [↑] or [↓] key to move the cursor onto the line
to be copied.
(3) Press the menu [Line copy].
(4) Use the [↑] or [↓] key to move the cursor onto the line
to be pasted.
(5) Press the menu [Line paste].
Note
(1) Once data is copied, it is held until the next tool management data is copied or until the tool management screen is
closed.
(2) For tool life management I, you cannot paste to the data that does not have the tool number. It causes a paste error.
IB-1501453-C
The tool management data list is displayed.
The tool management data, that is displayed in the de-
tailed view of tool management data, is erased.
The tool management data list is displayed.
The copied data is written in the line at the cursor posi-
tion.
The highlighted copy line is released.
178