Mitsubishi Electric C80 Series Instruction Manual page 215

C80 Series Instruction Manual
5 Setting a Tool and a Workpiece
Display items
(8) DNo.
(9) R compen
(10) Aux.
(11) Life
(12) Used
(*1) The group No. is not displayed for the tool life management III.
(*2) This action differs depending on MTB specifications
(*3) The "Length compensation" and "Radius compensation" calculation/direct compensation amount setting/display range
are as follows based on a combination of settings of "#1003 iunit" (input setup unit) and "#1041 Initial inch".
#1003 iunit
B
C
D
E
When data without the decimal point is input, a set unit can be specified by the parameter "#8119 Comp. unit switch".
IB-1501453-C
Tool radius compensation number.
Entering a new tool number automatically assigns the same compen-
sation number as the tool number.
If a new tool number is entered that is outside the allowable compen-
sation number range, the compensation number is assigned to "0".
The compensation number can also be changed to any number as
needed.
Tool radius compensation value.
One of the following values is displayed depending on the tool radius
compensation data format utilized by the method.
The value can be changed as needed.
0, 2: Radius dimension of tool compensation amount of the compen-
sation number designated by DNo.
1: Radius wear of tool compensation amount of the compensation
number designated by DNo.
This depends on the MTB specifications.
Set the usage time (minutes), attachment count (No. of times attached
to the spindle), or usage count (No. of holes drilled) for the life for each
tool based on the data format set for "Method".
The life is infinite when "0" is set.
This displays the usage data for individual tools based on the method
specified for the tool life management method.
<Note>
This data is not counted during machine lock, auxiliary function
lock, dry run or for a single block.
#1041 I_inch
0
1
0
1
0
1
0
1
Details
Setting/display range
-9999.999 to 9999.999
-999.9999 to 999.9999
-9999.9999 to 9999.9999
-999.99999 to 999.99999
-9999.99999 to 9999.99999
-999.999999 to 999.999999
-9999.999999 to 9999.999999
-999.9999999 to 999.9999999
190
Setting range
1 to 999
(*3)
0 to 65535
Usage time:
0 to 4000 (min)
No. of mounting times
0 to 65000 (set)
Usage count:
0 to 65000 (set)
Usage time:
0 to 4000 (min)
No. of mounting times
0 to 65000 (set)
Usage count:
0 to 65000 (set)