Mitsubishi Electric C80 Series Instruction Manual page 262

C80 Series Instruction Manual
6 Setting Parameters
Display items
Display items
(1) Parameter display area Press the parameter selection menu [Process param] or [Hi-prec param] etc. to
(2) Input section
Menus
Menus
This changes the display of each parameter type.
Process
param
<Note>
 The barrier data appears only for L system.
Fixed
[Menu select param] is displayed only when the parameter "#11032 Menu sel para lkof " (Menu se-
cycle
lect param setting enabled) is set to "1" or "2".
Ctrl
param 1
Ctrl
param 2
Ethrnet
param
Axis
param
Barrier
data
Hi-prec
param
Hi-prec
axis
Operate
param
Menu
select
This selects an arbitrary parameter number. Set the parameter number and press the [INPUT] key to
Para No
move that number to the top and display the parameter. The cursor also moves to that number.
search
This copies the parameter setting values in the designated range. The range is designated with num-
Area
bers.
copy
This pastes the range of parameters designated in area copy. They are pasted in a parameter corre-
Area
sponding to the axis or part system where the cursor is. Once copied, a parameter can be pasted any
paste
number of times until a new parameter is copied.
This can be selected if the total number of part system display axes is 4 or more. This is used at the
Next
parameter screen with the array structure for each axis.
axis
This closes the pop-up window and quits this function.
Close
change the parameter display contents. The screen layout can be switched by part
system (with [$] key) or by axis.
The set key displays. Press the [INPUT] key to set the display data in the parameter
where the cursor is located.
237
Details
Details
IB-1501453-C