Commissioning A Camera (With An Sd Card) - Huawei FusionModule500 User Manual

FusionModule500 Smart Mini Data Center
User Manual (ECC800e)
----End
Follow-up Procedure
Commission other cameras by referring to the procedure described in this section.

3.2.10.2 Commissioning a Camera (with an SD Card)

Context
If the VCN is not configured and an SD card is chosen, perform the following procedure.
Procedure
Step 1 Log in to the camera WebUI.
1.
2.
Issue 07 (2019-12-20)
Figure 3-6 Setting secondary stream 1 parameters
Configure the PC IP address and the camera IP address in the same network segment.
Enter the camera IP address (192.168.0.120 by default) in the address bar of the Internet
Explorer and press Enter.
Enter the preset user name admin and the preset password HuaWei123, and click Log
In.
Copyright © Huawei Technologies Co., Ltd.
3 Commissioning Guide
119