Huawei FusionModule500 User Manual page 69

FusionModule500 Smart Mini Data Center
User Manual (ECC800e)
Figure 2-47 Installing guide rails
1.
2.
3.
Step 2 Place the server on the guide rails and slide it along the guide rails into the cabinet.
Step 3 Align the two mounting ears of the server with the rack rail of the cabinet and tighten the
screws on the mounting ears.
Issue 07 (2019-12-20)
Place the guide rails horizontally at the installation position in the cabinet, as shown by
(1) in Figure 2-47.
Fix the guide rails using rubber plugs, as shown by (2) in
− In front of the guide rails: If a server is installed using the upper mounting holes,
insert rubber plugs tightly into the holes at the middle. If a server is installed using
mounting holes at the middle, insert rubber plugs tightly into the upper holes.
− Behind the guide rails: Insert rubber plugs tightly into the upper mounting holes.
(Optional) To enhance the rigidness and seismic-proof performance of a server, install
bolts at the rear of flexible guide rails, as shown by (3) in
Copyright © Huawei Technologies Co., Ltd.
2 Installation
Figure 2-47.
Figure 2-47.
60