FusionModule500 Smart Mini Data Center
User Manual (ECC800e)
Name, Specifications, and Appearance
Needle-nose pliers
Wire stripper
Multimeter
2.1.2 Checking Environment Before Installation
Ensure that the environment meets the requirements before installation.
Table 2-2 Installation environment checklist
Check Item
Operating temperature
Issue 07 (2019-12-20)
Diagonal pliers
Hydraulic pliers
Electroprobe
Specifications
If the battery is installed
in another equipment
room, temperature of the
smart module equipment
room should be in the
range of 0° C to 40° C.
If the battery is installed
in the same equipment
room as the smart
Copyright © Huawei Technologies Co., Ltd.
RJ11 crimping tool
Wire clippers
Heat shrink tubing
Check Result
□ Passed □ Failed
2 Installation
Polyvinyl chloride
(PVC) insulation
tape
Crimping tool
Cable ties
15