Site Equipment Preparation - Huawei FusionModule500 User Manual

FusionModule500 Smart Mini Data Center
User Manual (ECC800e)
Check Item
The previous weights do not include the weights of servers, LAN switches, and other devices
installed by customers. You can calculate the actual equivalent uniform load of all the devices
based on the GBJ 9-87 Load Code for the Design of Building Structures and GR-63-CORE
Network Equipment-Building System (NEBS) Requirements: Physical Protection. For details
about how to calculate the uniform floor load, see

2.1.3 Site Equipment Preparation



Pay attention to the following when unpacking battery packs.
Issue 07 (2019-12-20)
If any of the requirements is not met, contact Huawei technical support.
All cabinets and devices have been delivered to the site and checked against the delivery
list.
Cabinets and devices need to be transported to the specified positions based on the
detailed equipment room layout diagram and unpacked for further installation.
Copyright © Huawei Technologies Co., Ltd.
Specifications
(when one UPS and
two battery packs are
configured)
− Weight of the 42 U
cabinet ≤ 440 kg/m
(when one UPS and
four battery packs are
configured)
− Weight of the 42 U
cabinet ≤ 436 kg/m
(when one UPS, one
transformer, and three
battery packs are
configured)
 Battery cabinet scenario
(two cabinets as an
example)
Two-cabinet scenario
(Converged Cabinet and
battery cabinet): cabinet
weight ≤ 292 kg/m
2
(when one UPS is
configured without
battery)
C Bearing Capacity
2 Installation
Check Result
2
2
Assessment.
17