Huawei FusionModule500 User Manual page 72

FusionModule500 Smart Mini Data Center
User Manual (ECC800e)
Procedure
Step 1 Install a hard drive.
1.
2.
3.
4.
Step 2 Determine the mounting holes for the VCN540 in the network cabinet based on the
engineering layout diagram, adjust the guide rails and install floating nuts.
Issue 07 (2019-12-20)
the slots where disks are not installed, because removing the filler panels will affect the
heat dissipation of fans and generate some noises.
Install a hard drive.
Secure the hard drive to the front panel using a screwdriver.
Push the hard drive into the subrack along the guide rails until it cannot move forwards.
Close the ejector lever and push the hard drive in position.
Figure 2-52 Installing a hard drive
Copyright © Huawei Technologies Co., Ltd.
2 Installation
63