Huawei FusionModule500 User Manual page 73

FusionModule500 Smart Mini Data Center
User Manual (ECC800e)
Figure 2-53 Installing the floating nuts
(1) Guide rail
Step 3 Use four screws to configure one mounting ear on the left of the front panel and the same way
to configure the other ones on the right side. Then use a Phillips screwdriver to fasten the
screws to fix the mounting ears.
Figure 2-54 Installing mounting ears
Step 4 Place the VCN540 on the guide rails. Keep pushing the subrack until the mounting ears of the
subrack are close to the mounting bar at the front of the network cabinet.
Issue 07 (2019-12-20)
(2) Floating nut installation position
Copyright © Huawei Technologies Co., Ltd.
2 Installation
64