Replacing A Battery Current Sensor - Huawei FusionModule500 User Manual

FusionModule500 Smart Mini Data Center
User Manual (ECC800e)



Figure 4-13 Removing a battery MCB
Step 6 Push the buckle at the battery MCB outwards using a flat-head screwdriver, and remove the
faulty battery MCB.
Step 7 Install the new battery MCB by referring to the preceding method, connect cables, and tighten
screws.
Step 8 Reinstall the removed components, and close the corresponding cabinet door.
Step 9 Reconnect the cables to the UPS.
----End

4.5.2.13 Replacing a Battery Current Sensor

Prerequisites
Issue 07 (2019-12-20)
When removing cables, remove the battery cable below the battery MCB first.
After removing cables, insulate the cable terminals.
When removing cables, label the cables with corresponding terminal ports for later
connection.
Copyright © Huawei Technologies Co., Ltd.
4 Maintenance
184