Huawei FusionModule500 User Manual page 200

FusionModule500 Smart Mini Data Center
User Manual (ECC800e)
Figure 4-19 Removing the inner cover
Step 3 Remove the screws securing the camera base from the camera mounting plate, as shown in
Figure
Figure 4-20 Removing the camera base
Step 4 Disconnect the camera network cable and remove the dome camera.
Step 5 Install a new camera, reconnect the network cable, and secure the camera to the base using
screws.
----End
Issue 07 (2019-12-20)
In the scenario with a SD card, remove the SD card and install to a new camera.
4-20.
Copyright © Huawei Technologies Co., Ltd.
4 Maintenance
191