Optional) Installing The Infrared Remote Control Module; Optional) Installing The Pad - Huawei FusionModule500 User Manual

FusionModule500 Smart Mini Data Center
User Manual (ECC800e)

2.2.7.4 (Optional) Installing the Infrared Remote Control Module

Procedure
Step 1 Attach the infrared remote control module to the top of the Converged Cabinet.
----End

2.2.7.5 (Optional) Installing the Pad

Context
The pad is installed on the front door of the Converged Cabinet.
Figure 2-39 Pad installation position
(1) Pad installation position
Procedure
Step 1 Remove the baffle plate from the front door of the Converged Cabinet.
Step 2 Install the pad support fastener on the back of the front door of the Converged Cabinet.
Issue 07 (2019-12-20)

Adjust the installation position of the infrared remote control module depending on the actual
condition to ensure that the smart cooling product and infrared remote control module can receive
signals normally.
 The infrared remote control module address is set to 2 by default.
Copyright © Huawei Technologies Co., Ltd.
2 Installation
54